Why is the configurator event viewer indicating that file sent “ failed”

  • Communication Signal/Noise issue (see U5 below) for RS485 ;
  • Ensure that Network cabling have proper one-to-one pin assignments as per T568A or T568B pin outs; and
  • Ensure that the network does not have through-put issues or network bottle-necks.

Was this answer helpful to you?


Yes (0)    No (2)

Thank you! We will use your feedback to improve our frequently asked questions.
Thank you! We will use your feedback to improve our frequently asked questions.

Please contact Technical Support directly if you need further assistance.




GO BACK