When placing a call via ADC, the line would disconnect. Sometimes it allows to dial out and other times it dials partially?

Line load issue: do the following:

  • Remove all the Voice Entry panels connected to the single Tip and Ring Line:
  • Problem is resolved: verify which panel is overloading the system and replace; or
  • Ensure that a maximum of 4 Voice Entry panels are connected to one Tip and Ring Line

Was this answer helpful to you?


Yes (0)    No (0)

Thank you! We will use your feedback to improve our frequently asked questions.
Thank you! We will use your feedback to improve our frequently asked questions.

Please contact Technical Support directly if you need further assistance.




GO BACK