I used the elevator Restriction system to turn on small voltage AC system for a rental storage system. Upon testing the relays are not changing state?

Do not feed the elevator relays with AC power.

The Elevator Restriction 2012E boards are sensitive to AC power which can damage the relays (due to relay jittering caused by the EMI influence on the induction magnetic relay).

For more information please read the Elevator Restriction Installation and Operation manual.


Was this answer helpful to you?


Yes (0)    No (0)

Thank you! We will use your feedback to improve our frequently asked questions.
Thank you! We will use your feedback to improve our frequently asked questions.

Please contact Technical Support directly if you need further assistance.




GO BACK