The Moisture Proof detector is characterized by a black phenol-plastic seal plate and black and white pigtail connections. It is specified for use in high humidity environments and areas that are subject to corrosive elements or spray washing. The suffix “MP” denotes “Moisture Proof”.

Order Information

CR-135MP
Rate of Rise & Fixed Temperature to 135°F (57°C) Moisture Proof Heat Detector

CR-200MP
Rate of Rise & Fixed Temperature to 200°F (93°C) Moisture Proof Heat Detector

CF-135MP
Fixed Temperature 135°F (57°C) Moisture Proof Heat Detector

CF-200MP
Fixed Temperature 200°F (93°C) Moisture Proof Heat Detector

Credentials

* Listed by Fire Detection Devices

The post CR/CF-MP Series appeared first on Mircom.

This new duct smoke detector senses airflow speeds ranging from 100 to 4,000 feet per minute with proven System Sensor precision. The enhancements built into this model improve false alarm immunity (with plug-in sensor head); broaden operating temperature (-4ºF to 158ºF) and humidity (0 to 95 percent noncondensing) ranges; while simplifying installation and maintenance. These advance features can detect smoke even in the harshest duct applications.

The post D2 appeared first on Mircom.

This unit senses smoke in the most challenging conditions, operating in airflow speeds of 100 to 4,000 feet per minute, temperatures of –4°F to 158°F, and a humidity range of 0 to 95 percent (non-condensing).

A plug-in sensor head offers improved false alarm immunity and simple installation, testing, and maintenance. An improved cover design isolates the sensor head from the low-flow feature for simple maintenance.

The post D4120 appeared first on Mircom.

Installation Ease

The i3 line redefi nes installation ease with its plug-in design.
This allows an installer to pre-wire the bases included with
the heads. The large wire entry port and in-line terminals
provide ample room for neatly routing the wiring inside
the base. The base accommodates a variety of back box
mounting methods as well as direct mounting with drywall
anchors. To complete the installation, i3 heads plug-in to
the base with a simple Stop-Drop ‘N Lock action.

Intelligence

i3 detectors offer a number of intelligent features to
simplify testing and maintenance. Drift compensation
and smoothing algorithms are standard with the i3 line,
to minimize nuisance alarms. When connected to the
2W-MOD2 loop test/maintenance module, or a panel
equipped with the i3 protocol, 2-wire i3 detectors are
capable of generating a remote maintenance signal when
they are in need of cleaning. This signal is indicated via
an LED located at the module and the panel. To read the
sensitivity of i3 detectors, the SENS-RDR is a wireless
device that displays the sensitivity in terms of percent per
foot obscuration.

Instant Inspection

The i3 series provides wide angle red and green LED
indicators for instant inspection of the detector condition,
indicating: normal standby, out-of-sensitivity, alarm, or
freeze trouble conditions. When connected to the 2WMOD2
loop test/maintenance module or a panel with
the i3 protocol, the EZ Walk loop test feature is available
on 2-wire i3 detectors. This feature verifi es the initiating
loop wiring by providing LED status indication at each
detector.

Credentials

The post i3 Series appeared first on Mircom.

SD-100-2WT/SD-100-2WP

The SD-100-2WP is a two-wire smoke detector that uses a photoelectric technology and the SD-100-2WT is also a photoelectric smoke detector but with an additional fixed 135°F temperature heat sensor to further extend the sensing capabilities.

SD-100-4WT/SD-100-4WP

The SD-100-4WP is a four-wire smoke detector that uses a photoelectric technology and the SD-100-4WT is also a photoelectric smoke detector but with an additional fixed 135°F temperature heat sensor to further extend the sensing
capabilities.

RSR-100 Remote Sensitivity Reader

The RSR-100 Remote Sensitivity Reader is designed to measure the sensitivity of the SD-100 Series smoke detectors. This battery-powered device is equipped with an infrared optical interface for reading data sent by the smoke detector. The SD-100 decodes the sensitivity and status data and displays the information on its LCD display. The RSR-100 may be used either as a hand-held device or with a standard threaded extension pole.

Ordering Information: 

• SD-100-2WP-4K: 2-wire Conventional Smoke Detector w/ 4″ base
• SD-100-2WP-6K: 2-wire Conventional Smoke Detector w/ 6″ base
• SD-100-4WP-4K: 4-wire Conventional Smoke Detector w/ 4″ base
• SD-100-4WP-6K: 4-wire Conventional Smoke Detector w/ 6″ base
• SD-100-2WT-4K: 2-wire Conventional Smoke & Heat Detector w/ 4″ base
• SD-100-2WT-6K: 2-wire Conventional Smoke & Heat Detector w/ 6″ base
• SD-100-4WT-4K: 4-wire Conventional Smoke & Heat Detector w/ 4″ base
• SD-100-4WT-6K: 4-wire Conventional Smoke & Heat Detector w/ 6″ base
• RSR-100: Remote Sensitivity Reader

The post SD-100 SERIES appeared first on Mircom.

Using a bi-metal disc as a heat sensing element, an alarm is initiated when the air temperature exceeds the unit’s rated level. Only when the air temperature decreases below the rated level will the detector automatically reset.

Order Information

TD 135
Fixed Temperature 135°F (57°C) self restoring heat detector

TD 200
Fixed Temperature 200°F (94°C) self restoring heat detector

Credentials

The post TD Series appeared first on Mircom.