The ALCN-960MISO Quad Loop Adder motherboard and the ALCN-960D daughterboard are components of the FleX-Net system that allows MIX-4000 series devices to be added to the project.
The ALCN-960MISO/ALCN-960D connect on the internal bus and mount within the main panel enclosure.
The SLCs may be configured for Class A or Class B wiring without the need for any additional modules
Power is provided by the FleX-Net mainboard.
• ALCN-960MISO allows for two (2) SLCs of MIX-4000 series devices to be connected to the FleX-Net panel.
• ALCN-960D can be connected to ALCN-960MISOto add an additional two (2) SLCs using only one(1)internal bus address.
• Any combination of MIX-4000 series devices up to 240 can be connected to a single SLC.
• Up to seven (7) ALCN-960MISO and seven (7) ALCN-960D can connect on a FleX-Net panel.
AGENCY LISTINGS
NOTES
All circuits are power limited and must use type FPL, FPLR, or FPLP power-limited cable.
For more information, refer to wiring instructions in the Network Fire Alarm Manual LT-894. Wiring identical to that provided for ALCN-792M /ALCN-792MISO and ALCN-792D.
Mircom Training
https://mircom.com/technical-support/mircom-training/
Where to buy
https://mircom.com/where-to-buy/
Contact Us
https://mircom.com/contact/
