• Mircom is releasing upgraded TX3 NANO Software/Application and the Web Based Configurator files. 

The new version numbers are as follows:

• SOFTWARE/APPLICATION v 1.1.3 
• TX3 NANO WEB BASED CONFIGURATOR v 1.5.36

• Added default Static IP address 192.162.1.128 
• Front panel configuration for specific configurable items (ie. Entering a static IP address, setting the date/time, setting time zones, restarting the unit)
• Resident privilege to make an audio SIP call to Nano using the MiEntry app
• Backup/Restore job files from the configurator
• Factory reset
• Elevator Restriction Unit integration with SIP and PSTN (POTs)
• Correlate any DTMF digit press with an action (turning on an output)

Enhancements:

• Enable/Disable the tamper alarm
• Voice Prompt configuration on how to use the panel in 3 languages (English, Spanish, and French)
• Force change user credential after the first log in
• Upgrade Nano software/application and the configurator using the web-based configurator
• Added missing translations

Static IP Address 

The Nano running on software/application version 1.1.1 has a default static IP address of 192.168.1.128 Customers can assign an available IP address to the unit manually using the front display as well. To use the default IP address or to assign a Static IP address, press and hold the home key for 10 seconds. Once the information screen is shown, press the call button while holding the home key. The unit should display the following menu.

To use the default IP address, select the ‘Disable DHCP’ feature. Upon restarting, the unit will have a default static IP address of 192.168.1.128.  

To manually assign a static IP address, go to Set IP, Set MASK (Subnet Mask), and Set GATEWAY to configure the IP address for the unit. Once the unit is configured, restart the unit to place the changes in effect. 

Note: For static IP assignment, ensure the IP address the system will use is available/have the IT person on site to provide with an available IP address.

Upgrading the Nano Software/Application and the Configurator 

When upgrading the Software/Application and the Configurator, existing job files are retained. It is highly recommended to backup existing jobs as a precaution in case some unexpected error occurs. 

To send the software/application and configurator file log in to the unit using the web-based configurator, go to Nano Settings → choose each file under Update TX3 Nano → click on Update. Once both files are sent, the unit needs restarted. Once the unit boots up, wait for 5 minutes and restart the unit again. 

Upon booting up for the 2nd time, the unit should have upgraded software/application and configurator. 

*Note: It is mandatory to restart the unit twice and wait for at least 5 minutes once the unit boots up after the first restart. This process is crucial for this version of the software/application and configurator only.

Compatibility Chart 

The Nano can be integrated with other TX3 Voice Entry and Card Access systems. The integration allows to send correlation between multiple units to turn on a specific output based on an event. Below is a chart showing the software/application and firmware compatibility for TX3 family control panels.

Known Issues 

The unit will fail to boot up if the IR (infrared) sensor detects dark environment. To prevent from this issue, make sure to turn on the unit while the camera lens has some exposure to light. 

No audio will play for 1 hour after changing the Time Zone from the front panel. 

There is no method to configure the screensaver feature using the configurator. Please contact Mircom Tech Support if you need to configure the screensaver feature. 

Other 

While the new configurator and firmware is being released on the web site, shipped products may continue to have the existing software/application and configurator as existing stock is depleted. Installers are encouraged to update new installations but are free to keep existing systems running at a previous version if they are simply replacing defective parts. Mircom strives to offer the highest quality products and services. On occasion, an issue may require field action and we regret when these issues arise. As part of our commitment to quality, we incorporate any findings into a continuous improvement process to better serve our customers in the future. As part of our support offering, please feel free to contact us with any inquiries or assistance you may require. If you have any questions or concerns, please contact the Technical Support Department directly.