Dear Valued Customer,
In an effort to make your downloading process more efficient, we have updated our manufacturing process for the FX-400/401 Motherboard MD-1343. Both the USB and RS-232 ports have been removed (see FIG 1). They have been replaced with a micro-USB port (P5 on the core board, see FIG 2).
The move to the micro-USB connection provides a download process that is both faster and more reliable.
On the latest revision you will see a sticker on the core board showing “SO-289 v3.0.1” or “SO-479 v3.0.1” (or a number higher than 3.0.1). The plug-in core board is shown in FIG 2 below:
To establish a connection, connect the USB cable to a USB port on the computer, and to the USB port on the FX-400/401 plug-in core board. This port is labeled P5.
There are also training videos via Mircom Learn for the FX-400 series that are focused on panel programming/FW upgrade that showcase micro-USB as the preferred method.
Here is one of them: https://www.youtube.com/watch?v=YjMdF43nIyE
We thank you for your continued support.
If you have any questions or comments, please contact us directly at: [email protected]
Best Regards,
Product Management
Mircom Group of Companies
Vaughan, Ontario, Canada, L4K 5W3