The Select Series low profile smoke detectors are intelligent addressable plug-in detectors with point ID capability that enables each detector address to be set with rotary address switches providing exact device locations.
Detector sensitivity is continually monitored and reported to the fire alarm control panel. These intelligent sensors utilize a state-of-the-art thermistor sensing circuit for fast response.
Mircom’s Advanced Protocol uses a high speed communication protocol that greatly increases the speed of communication between the intelligent devices.
The modern design and expanded color options support contemporary aesthetic demands. In addition, each detector is constructed for exceptional installation and maintenance efficiency.
The Select Series MIX-2351AP(A) photoelectric detector’s re-designed optical sensing chamber is engineered to sense smoke produced by a wide range of combustion sources in accordance with more stringent code standards. The sensitivity of Select Series detectors can be programmed using the control panel software to suit the environment.
The MIX-2351RAP(A) photoelectric detector is also remote test capable for use with a duct smoke detector.
The MIX-2351TAP(A) multi-sensor detector offers both photoelectric detection or thermal detection through dual electronic thermistors at 135°F (57°C) fixed temperature thermal sensing.
- Multi-criteria detection
- Designed to meet UL 268 7th Edition and UL 521 Listed. (MIX-2351AP/TAP/RAP)
- Designed to meet CAN/ULC S529 Rev 4 and CAN/ULC S530 listed. (MIX-2351APA/TAPA/RAPA)
- New modern profile
- Analog communications
- Low standby current
- Rotary address switches
- Dual LEDs for 360° visibility
- Expanded color kit options
|MIX-2351AP||Intelligent Photoelectric smoke detector – UL||White|
|MIX2351APA||Intelligent Photoelectric smoke detector – ULC||White|
|MIX-2351RAP||Intelligent Photoelectric smoke detector, remote test capable, for use with duct smoke detectors – UL||White|
|MIX-2351RAPA||Intelligent Photoelectric smoke detector, remote test capable, for use with duct smoke detectors – ULC||White|
|MIX-2351TAP||Intelligent Photoelectric smoke detector with Thermal – UL||White|
|MIX-2351TAPA||Intelligent Photoelectric smoke detector with Thermal – ULC||White|
|B501-WHITE||4″ Flangeless mounting base – UL/ ULC||White|
|B501-IV||4″ Flangeless mounting base – UL/ ULC||Ivory|
|B300-6||6″ Flanged mounting base – UL||White|
|B300-6-IV||6″ Flanged mounting base – UL||Ivory|
|B300A-6||6″ Flanged mounting base – ULC||White|
|B300A-6-IV||6″ Flanged mounting base – ULC||Ivory|
|B200SR-WH||Standard Sounder Base – UL||White|
|B200SR-IV||Standard Sounder Base – UL||Ivory|
|B200SRA-WH||Standard Sounder Base – ULC||White|
|B200SRA-IV||Standard Sounder Base – ULC||Ivory|
|B200SR-LF-WH||Low-frequency Sounder Base – UL||White|
|B200SR-LF-IV||Low-frequency Sounder Base – UL||Ivory|
|B224BI-WH||Isolator Base – UL||White|
|B224BI-IV||Isolator Base – UL||Ivory|
|B224BIA-WH||Isolator Base – ULC||White|
|B224BIA-IV||Isolator Base – ULC||Ivory|
|B224RB-WH||Relay Base – UL||White|
|B224RB-IV||Relay Base – UL||Ivory|
|B224RB-WH||Relay Base – ULC||White|
|B224RB-IV||Relay Base – ULC||Ivory|
|CK300||Color Kit (includes cover and trim ring) – Pack of 10||White|
|CK300-IV||Color Kit (includes cover and trim ring) – Pack of 10||Ivory|
|CK300-BL||Color Kit (includes cover and trim ring) – Pack of 10||Black|
|RA100Z||Remote LED Annunciator – UL||Ivory|
|RA100ZA||Remote LED Annunciator – ULC||Ivory|