The Select Series low profile smoke detectors are intelligent addressable plug-in detectors with point ID capability that enables each detector address to be set with rotary address switches providing exact device locations.
Detector sensitivity is continually monitored and reported to the fire alarm control panel. These intelligent sensors utilize a state-of-the-art thermistor sensing circuit for fast response.
Mircom’s Advanced Protocol uses a high speed communication protocol that greatly increases the speed of communication between the intelligent devices. The modern design and expanded color options support contemporary aesthetic demands. In addition, each detector is constructed for exceptional installation and maintenance efficiency.
The Select Series MIX-2351TIRAP and MIX-2351TIRAPA are intelligent, multi-criteria detectors incorporating photoelectric, thermal, and infrared (PTIR) detection principles. Advanced algorithms maximize the advantages of each sensor type creating a more robust detection strategy rejecting nuisance sources, but still responding quickly to real fires.
By using multiple sensors and communication between the sensing elements, nuisance alarms can be greatly reduced when compared to single-sensing methods.
– Photoelectric sensors detect particulate in the air associated with smoke
– The thermal sensors detect heat including its rate-of-rise with a 135°F (57°C) fixed temperature threshold
– The Infrared sensor discerns light patterns in the environment as an additional data point for alarm determination
Because it rejects certain nuisance alarm triggers, the PTIR detector is ideal for applications where moderate nuisance conditions exist. For example, single-sensing detectors might trigger a false alarm on transient cigarette smoke or a quick burst of steam.
The PTIR detector meets both UL 268 7th edition and UL 521 (MIX-2351TIRAP) / CAN/ULC S529 Rev 4 and CAN/ULC S530 (MIX-2351TIRAPA) listing requirements and can indicate distinct smoke and heat alarms. This dual nature supports a local alarm setting for photoelectric detection and a general evacuation setting based on thermal detection. This can minimize work interruptions in multi-level buildings.
- Multi-criteria detection
- UL 268 7th Edition and UL 521 Listed. (MIX-2351TIRAP)
- CAN/ULC S529 Rev 4 and CAN/ULC S530 listed. (MIX-2351TIRAPA)
- New modern profile
- Analog communications
- Low standby current
- Rotary address switches
- Dual LEDs for 360° visibility
- Expanded color kit options
|Intelligent PTIR Detectors|
|MIX-2351TIRAP||Intelligent Photoelectric, thermal and infrared smoke detector – UL||White|
|MIX-2351TIRAPA||Intelligent Photoelectric, thermal and infrared smoke detector – ULC||White|
|B501-WHITE||4″ Flangeless mounting base – UL/ ULC||White|
|B501-IV||4″ Flangeless mounting base – UL/ ULC||Ivory|
|B300-6||6″ Flanged mounting base – UL||White|
|B300-6-IV||6″ Flanged mounting base – UL||Ivory|
|B300A-6||6″ Flanged mounting base – ULC||White|
|B300A-6-IV||6″ Flanged mounting base – ULC||Ivory|
|B200SR-WH||Standard Sounder Base – UL||White|
|B200SR-IV||Standard Sounder Base – UL||Ivory|
|B200SRA-WH||Standard Sounder Base – ULC||White|
|B200SRA-IV||Standard Sounder Base – ULC||Ivory|
|B200SR-LF-WH||Low-frequency Sounder Base – UL||White|
|B200SR-LF-IV||Low-frequency Sounder Base – UL||Ivory|
|B224BI-WH||Isolator Base – UL||White|
|B224BI-IV||Isolator Base – UL||Ivory|
|B224BIA-WH||Isolator Base – ULC||White|
|B224BIA-IV||Isolator Base – ULC||Ivory|
|B224RB-WH||Relay Base – UL||White|
|B224RB-IV||Relay Base – UL||Ivory|
|B224RB-WH||Relay Base – ULC||White|
|B224RB-IV||Relay Base – ULC||Ivory|
|CK300-IR||PTIR Color Kit (includes cover and trim ring) – Pack of 10||White|
|CK300-IR-IV||PTIR Color Kit (includes cover and trim ring) – Pack of 10||Ivory|
|CK300-IR-BL||PTIR Color Kit (includes cover and trim ring) – Pack of 10||Black|
|RA100Z||Remote LED Annunciator – UL||Ivory|
|RA100ZA||Remote LED Annunciator – ULC||Ivory|