The MIX-FC351AP is an intelligent, multi-criteria detector incorporating photoelectric, thermal, infrared and Carbon Monoxide (CO) detection principles that provide both fire and CO detection.
For fire, sophisticated algorithms maximize the advantages of all four sensor types creating our best detection strategy offering heightened immunity to nuisance particulate and enhanced sensitivity to real fire. Multiple sensors and communication can greatly reduce nuisance alarms compared to single sensing methods.
This ability to reject certain nuisance alarm triggers, such as theater smoke, supports the use of the fire/CO detector in applications where moderate to heavy nuisance conditions exist that might cause single sensing detectors to false alarm.
The MIX-FC351AP meets both UL 268 7th edition and UL 521 listing requirements for fire detection as well as the UL 2075 standard for system-connected life safety carbon monoxide detection.
The MIX-FC351AP is recommended for use in conjunction with the APB200-WH or APB200-LF-WH intelligent sounder bases, which can generate either a Temp 3 pattern for fire or a Temp 4 pattern for CO alarm indication. The APB200-LF-WH low frequency sounder base is designed to meet the NFPA 72 sleeping space requirement to produce a fundamental frequency of 520 Hz +/– 10% with a square wave or its equivalent.
The APB200-WH/ APB200-LF-WH recognize the synchronization protocol. This enables it to be used as a component of the general evacuation signal, along with other horns, horn strobes, and chimes, when connected to a power supply or Fire Alarm Control Panel (FACP) output capable of generating the synchronization pulses. With each sounder base carrying a unique address, the FACP can then command an indvidual sounder, or a group of sounders, to activate. The command set from the panel can be tailored to the specific event, allowing selection of volume, tone, and group.
Mircom’s Advanced Protocol (AP) devices use a high speed communication protocol that greatly increases the speed of communication between the intelligent devices. Mircom’s Advanced Protocol uses a superior group polling method as well as an interrupt feature that provide for a faster response to an alarm condition. In addition, the Advanced Protocol allows for greater system capacity with support for up to 159 sensors and 159 modules totaling to 318 devices per SLC circuit.
FEATURES
- Unique ability to detect all four major elements of a fire
- Separate CO detection signal
- Highest nuisance alarm immunity
- Automatic drift compensation of smoke sensor and CO cell
- RealTest® CO testing capability
- UL 268 7th edition, UL 521, and UL 2075 listed
- Separates audible signal for fire or CO alarm when used with the APB200 bases
- 10 year CO cell with end-of-life warning and fault
- Compatible with Mircom’s Intelligent control panels operating in AP mode such as FlexNet Series; CLIP mode is not supported.
ORDERING INFORMATION
| MIX-FC351AP | Advanced Multi-Criteria Fire/CO Detector (UL) |
| MIX-FC351APA | Advanced Multi-Criteria Fire/CO Detector (ULC) |
| APB200-WH | Intelligent Sounder Base – White (UL) |
| APB200-IV | Intelligent Sounder Base – Ivory (UL) |
| APB200A-WH | Intelligent Sounder Base – White (ULC) |
| APB200A-IV | Intelligent Sounder Base – Ivory (ULC) |
| APB200-LF-WH | Addressable low frequency sounder base – White (UL) |
| APB200-LF-IV | Addressable low frequency sounder base – Ivory (UL) |
| APB200COA-WH | Intelligent Sounder Base. Includes CO detector markings in English and French – White (ULC) |
| APB200COA-IV | Intelligent Sounder Base. Includes CO detector markings in English and French – Ivory (ULC) |
AGENCY LISTINGS
