Mircom’s MPS-800MP(U) Series Fire Alarm Manual Pull Stations provide manual fire alarm activation. The new MPS-800 Series uses raised symbols and icons instead of printed text that makes them universally recognized.
Features
- Completely made of LEXAN material
- Closed-fist operation (ADA – Americans with Disability Act)
- No printed text on the devices, symbols and icons are used instead
- Symbols are raised to be easily recognized by touch
- Compatible with FX-400 Series and Flex-Net FX-4000 Fire Alarm Panels
- Easy installation
- Accessible from the front for wiring while mounted
- Mounts on a single gang backbox
- Temperature range from 0ºC to 49ºC
- Device comes with a reset key
- Indoor use only
- Alarm LED is viewable from the front – Useful for troubleshooting
Addressing is done using the MIX-4090 Device Programmer. For setting the address on this device, disconnect it from the loop, or ensure that the loop to which is connected is both disconnected from the panel and shorted across the SCL+ and SLC- inputs at the device. Failing to take either of these steps may change the address programming of previously configured sensors on the loop.
Ordering Information
MPS-810MP: MP 1 Stage Addressable Double Action Pull Station, ULC
MPS-810MPU: MP 1 Stage Addressable Double Action Pull Station, UL
MPS-802MP: MP 2 Stage Addressable Pull Station, ULC
MPS-822MP: MP Maglock 2 Stage Double Action Pull Station, ULC
MIX-4090: Addressable Device Programming tool
BB-800: Surface backbox for 800 Series Pull Stations
Agency Listings
