MS-400MP Series Addressable Manual Stations

Mircom’s MS-400MP(U) Series Fire Alarm Manual Stations provide manual fire alarm activation. These pull stations are available as one stage or two stage stations. On the two stage model, a key switch allows the activation of the stage two alarm.

PRODUCT INQUIRY

Have a question or need more details? Use the button below to contact us.

Product Inquiry
SKU: MS-400AP-1 Category:

Mircom’s MS-400MP(U) Series Fire Alarm Manual Stations provide manual fire alarm activation. These pull stations are available as one stage or two stage stations. On the two stage model, a key switch allows the activation of the stage two alarm.

FEATURES

• High quality, extruded aluminum.
• Attractive, Low Profile Design
• Built-in intelligent addressable module with Mircom Protocol.
• Pulling the handle initiates the operation of the intelligent module.
• Address is set by the MIX-4090 hand-held device programmer.
• Key switch provided for two (2) stage version.
• Standard Single Gang Mount
• Plastic Rod or Break glass Optional

ORDERING INFORMATION*

MS-401MP
Intelligent Addressable Single Stage Manual Station – ULC (Bilingual)

MS-402MP
Intelligent Addressable Two Stage Manual Station – ULC (Bilingual)

MS-407MP
Intelligent Addressable Single Stage Manual Station with additional N.C. switch – ULC (Bilingual)

MS-401MPU
Intelligent Addressable Single Stage Manual Station – UL

MS-407MPU
Intelligent Addressable Single Stage Manual Station with additional N.C. switch – UL

MIX-4090
Addressable Device Programming Tool

GL-004K
Optional Plastic Rod

Agency Listings

ULULC
*Please contact local Mircom Sales Representative for regional availability.
ATTENTION: To set the address on this device, disconnect it from the loop, or ensure that the loop to which it is connected is both disconnected from the panel and shorted across the SLC+ and SLC− inputs at the device. Failing to take either of these steps may change the address programming of previously configured sensors on the same loop.